The IEM-500 has 16 frequencies in the low-interference and licence-free UHF band of 863 to 865 MHz.
The multifrequency transmitter is equipped with UHF pilot tone technology (PLL) and transmits signals to any number of receivers with the same carrier frequency. A total of 3 sets can be operated in parallel without any interference.
Besides frequency group, frequency channel and lock function, the IEM provides various modes: dual mono, two channel mono or stereo mode. In the dual mono mode you hear both instruments as a mono signal, left as well as right. In contrast, in the two channel mono mode it’s possible to hear different mixtures in mono on the left and on the right (e.g. vocals left and guitar right). Stereo operation provides a stereo signal of the input sources
The stereo UHF receiver has two input combo jacks and a rubber antenna with TNC connection. Rack mounting is no problem, thanks to the included accessories. To guarantee interference-free reception, the antenna can be placed outside the rack via the included extension cord. In addition, the input signal can be lowered from 0 to –12 dB.
A distinctive feature of the receiver is the HF-function (High Frequency) which boosts the high frequencies. The operating buttons of the receiver are located above the battery compartment and are protected by its cover from accidental contact.
The IEM-500 is completed by a padded transport case and a rack mounting set.
Visit cms.omnitronic.de for more.
Besides frequency group, frequency channel and lock function, the IEM provides various modes: dual mono, two channel mono or stereo mode. In the dual mono mode you hear both instruments as a mono signal, left as well as right. In contrast, in the two channel mono mode it’s possible to hear different mixtures in mono on the left and on the right (e.g. vocals left and guitar right). Stereo operation provides a stereo signal of the input sources
The stereo UHF receiver has two input combo jacks and a rubber antenna with TNC connection. Rack mounting is no problem, thanks to the included accessories. To guarantee interference-free reception, the antenna can be placed outside the rack via the included extension cord. In addition, the input signal can be lowered from 0 to –12 dB.
A distinctive feature of the receiver is the HF-function (High Frequency) which boosts the high frequencies. The operating buttons of the receiver are located above the battery compartment and are protected by its cover from accidental contact.
The IEM-500 is completed by a padded transport case and a rack mounting set.
Visit cms.omnitronic.de for more.
Be the first to post a comment about this news item
Viewers of this article also read...
- [MUSIKMESSE] JBL M20 JBL adds the M20, a dual 10" stage monitor, to its VTX M Series.
- [MUSIKMESSE] JBL EON One JBL introduces EON One, a new portable, all-in-one PA system.
- [MUSIKMESSE] Korg Stageman 80 Korg presents the Stageman 80, a sort of mix between a guitar amp, a portable PA system and a groovebox.