The 5XT is based on a two-way passive design with a nominal impedance of 16 ohms. The system contains a one-inch diaphragm compression driver coaxially loaded by a five-inch low-mid frequency transducer mounted in a bass-reflex tuned enclosure.
The 5XT cabinet is made of Baltic birch plywood. A 3/8-inch microphone stand insert and two M8 inserts for the ETR5 flying bracket are integrated into the cabinet. The 5XT enclosure operates over a frequency range of 90 Hz to 20 kHz. The coaxial transducer arrangement produces a 100-degree axi-symmetric directivity output.
Power and processing for the 5XT is delivered by the LA4 or LA8 amplified controller.
Suited for use with L-Acoustics’ KIVA and XT series enclosures – including the 5XT – the new SB15m extends the operating frequency range of these systems down to 40 Hz.
The SB15m features a single 15-inch driver in a bass reflex tuned enclosure. The SB15m cabinet is likewise made of Baltic birch plywood. A pole-mount socket is integrated into the top of the SB15m cabinet allowing one XT enclosure or two KIVA to be mounted directly above. SB15m subwoofers can be flown or ground-stacked as a standalone vertical array or within an SB15m/KIVA array.
Like the 5XT, the SB15m is powered and processed by the LA4 or LA8 amplified controller.
Pricing & Availability:
Shipping: Q4 2012
- 5XT $850
- SB15m $2660
For more information, visit www.l-acoustics.com.
Viewers of this article also read...
-
[MUSIKMESSE] JBL M20
JBL adds the M20, a dual 10" stage monitor, to its VTX M Series.
-
[MUSIKMESSE] JBL EON One
JBL introduces EON One, a new portable, all-in-one PA system.
-
[MUSIKMESSE] Korg Stageman 80
Korg presents the Stageman 80, a sort of mix between a guitar amp, a portable PA system and a groovebox.